home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HPAVC
/
HPAVC CD-ROM.iso
/
TUT10NEW.ZIP
/
GFX.PAS
< prev
next >
Wrap
Pascal/Delphi Source File
|
1994-04-05
|
11KB
|
389 lines
Unit GFX;
INTERFACE
USES crt;
CONST VGA = $A000;
TYPE Virtual = Array [1..64000] of byte; { The size of our Virtual Screen }
VirtPtr = ^Virtual; { Pointer to the virtual screen }
VAR Virscr : VirtPtr; { Our first Virtual screen }
Vaddr : word; { The segment of our virtual screen}
Procedure SetMCGA;
{ This procedure gets you into 320x200x256 mode. }
Procedure SetText;
{ This procedure returns you to text mode. }
Procedure Cls (Where:word;Col : Byte);
{ This clears the screen to the specified color }
Procedure SetUpVirtual;
{ This sets up the memory needed for the virtual screen }
Procedure ShutDown;
{ This frees the memory used by the virtual screen }
procedure flip(source,dest:Word);
{ This copies the entire screen at "source" to destination }
Procedure Pal(Col,R,G,B : Byte);
{ This sets the Red, Green and Blue values of a certain color }
Procedure GetPal(Col : Byte; Var R,G,B : Byte);
{ This gets the Red, Green and Blue values of a certain color }
procedure WaitRetrace;
{ This waits for a vertical retrace to reduce snow on the screen }
Procedure Hline (x1,x2,y:word;col:byte;where:word);
{ This draws a horizontal line from x1 to x2 on line y in color col }
Procedure Line(a,b,c,d:integer;col:byte;where:word);
{ This draws a solid line from a,b to c,d in colour col }
Procedure DrawPoly(x1,y1,x2,y2,x3,y3,x4,y4:integer;color:byte;where:word);
{ This draw a polygon with 4 points at x1,y1 , x2,y2 , x3,y3 , x4,y4
in color col }
Function rad (theta : real) : real;
{ This calculates the degrees of an angle }
Procedure Putpixel (X,Y : Integer; Col : Byte; where:word);
{ This puts a pixel on the screen by writing directly to memory. }
Function Getpixel (X,Y : Integer; where:word) :Byte;
{ This gets the pixel on the screen by reading directly to memory. }
IMPLEMENTATION
{──────────────────────────────────────────────────────────────────────────}
Procedure SetMCGA; { This procedure gets you into 320x200x256 mode. }
BEGIN
asm
mov ax,0013h
int 10h
end;
END;
{──────────────────────────────────────────────────────────────────────────}
Procedure SetText; { This procedure returns you to text mode. }
BEGIN
asm
mov ax,0003h
int 10h
end;
END;
{──────────────────────────────────────────────────────────────────────────}
Procedure Cls (Where:word;Col : Byte); assembler;
{ This clears the screen to the specified color }
asm
push es
mov cx, 32000;
mov es,[where]
xor di,di
mov al,[col]
mov ah,al
rep stosw
pop es
End;
{──────────────────────────────────────────────────────────────────────────}
Procedure SetUpVirtual;
{ This sets up the memory needed for the virtual screen }
BEGIN
GetMem (VirScr,64000);
vaddr := seg (virscr^);
END;
{──────────────────────────────────────────────────────────────────────────}
Procedure ShutDown;
{ This frees the memory used by the virtual screen }
BEGIN
FreeMem (VirScr,64000);
END;
{──────────────────────────────────────────────────────────────────────────}
procedure flip(source,dest:Word); assembler;
{ This copies the entire screen at "source" to destination }
asm
push ds
mov ax, [Dest]
mov es, ax
mov ax, [Source]
mov ds, ax
xor si, si
xor di, di
mov cx, 32000
rep movsw
pop ds
end;
{──────────────────────────────────────────────────────────────────────────}
Procedure Pal(Col,R,G,B : Byte); assembler;
{ This sets the Red, Green and Blue values of a certain color }
asm
mov dx,3c8h
mov al,[col]
out dx,al
inc dx
mov al,[r]
out dx,al
mov al,[g]
out dx,al
mov al,[b]
out dx,al
end;
{──────────────────────────────────────────────────────────────────────────}
Procedure GetPal(Col : Byte; Var R,G,B : Byte);
{ This gets the Red, Green and Blue values of a certain color }
Var
rr,gg,bb : Byte;
Begin
asm
mov dx,3c7h
mov al,col
out dx,al
add dx,2
in al,dx
mov [rr],al
in al,dx
mov [gg],al
in al,dx
mov [bb],al
end;
r := rr;
g := gg;
b := bb;
end;
{──────────────────────────────────────────────────────────────────────────}
procedure WaitRetrace; assembler;
{ This waits for a vertical retrace to reduce snow on the screen }
label
l1, l2;
asm
mov dx,3DAh
l1:
in al,dx
and al,08h
jnz l1
l2:
in al,dx
and al,08h
jz l2
end;
{──────────────────────────────────────────────────────────────────────────}
Procedure Hline (x1,x2,y:word;col:byte;where:word); assembler;
{ This draws a horizontal line from x1 to x2 on line y in color col }
asm
mov ax,where
mov es,ax
mov ax,y
mov di,ax
shl ax,8
shl di,6
add di,ax
add di,x1
mov al,col
mov ah,al
mov cx,x2
sub cx,x1
shr cx,1
jnc @start
stosb
@Start :
rep stosw
end;
{──────────────────────────────────────────────────────────────────────────}
Procedure Line(a,b,c,d:integer;col:byte;where:word);
{ This draws a solid line from a,b to c,d in colour col }
function sgn(a:real):integer;
begin
if a>0 then sgn:=+1;
if a<0 then sgn:=-1;
if a=0 then sgn:=0;
end;
var i,s,d1x,d1y,d2x,d2y,u,v,m,n:integer;
begin
u:= c - a;
v:= d - b;
d1x:= SGN(u);
d1y:= SGN(v);
d2x:= SGN(u);
d2y:= 0;
m:= ABS(u);
n := ABS(v);
IF NOT (M>N) then
BEGIN
d2x := 0 ;
d2y := SGN(v);
m := ABS(v);
n := ABS(u);
END;
s := m shr 1;
FOR i := 0 TO m DO
BEGIN
putpixel(a,b,col,where);
s := s + n;
IF not (s<m) THEN
BEGIN
s := s - m;
a:= a + d1x;
b := b + d1y;
END
ELSE
BEGIN
a := a + d2x;
b := b + d2y;
END;
end;
END;
{──────────────────────────────────────────────────────────────────────────}
Procedure DrawPoly(x1,y1,x2,y2,x3,y3,x4,y4:integer;color:byte;where:word);
{ This draw a polygon with 4 points at x1,y1 , x2,y2 , x3,y3 , x4,y4
in color col }
var
x:integer;
mny,mxy:integer;
mnx,mxx,yc:integer;
mul1,div1,
mul2,div2,
mul3,div3,
mul4,div4:integer;
begin
mny:=y1; mxy:=y1;
if y2<mny then mny:=y2;
if y2>mxy then mxy:=y2;
if y3<mny then mny:=y3;
if y3>mxy then mxy:=y3; { Choose the min y mny and max y mxy }
if y4<mny then mny:=y4;
if y4>mxy then mxy:=y4;
if mny<0 then mny:=0;
if mxy>199 then mxy:=199;
if mny>199 then exit;
if mxy<0 then exit; { Verticle range checking }
mul1:=x1-x4; div1:=y1-y4;
mul2:=x2-x1; div2:=y2-y1;
mul3:=x3-x2; div3:=y3-y2;
mul4:=x4-x3; div4:=y4-y3; { Constansts needed for intersection calc }
for yc:=mny to mxy do
begin
mnx:=320;
mxx:=-1;
if (y4>=yc) or (y1>=yc) then
if (y4<=yc) or (y1<=yc) then { Check that yc is between y1 and y4 }
if not(y4=y1) then
begin
x:=(yc-y4)*mul1 div div1+x4; { Point of intersection on x axis }
if x<mnx then
mnx:=x;
if x>mxx then
mxx:=x; { Set point as start or end of horiz line }
end;
if (y1>=yc) or (y2>=yc) then
if (y1<=yc) or (y2<=yc) then { Check that yc is between y1 and y2 }
if not(y1=y2) then
begin
x:=(yc-y1)*mul2 div div2+x1; { Point of intersection on x axis }
if x<mnx then
mnx:=x;
if x>mxx then
mxx:=x; { Set point as start or end of horiz line }
end;
if (y2>=yc) or (y3>=yc) then
if (y2<=yc) or (y3<=yc) then { Check that yc is between y2 and y3 }
if not(y2=y3) then
begin
x:=(yc-y2)*mul3 div div3+x2; { Point of intersection on x axis }
if x<mnx then
mnx:=x;
if x>mxx then
mxx:=x; { Set point as start or end of horiz line }
end;
if (y3>=yc) or (y4>=yc) then
if (y3<=yc) or (y4<=yc) then { Check that yc is between y3 and y4 }
if not(y3=y4) then
begin
x:=(yc-y3)*mul4 div div4+x3; { Point of intersection on x axis }
if x<mnx then
mnx:=x;
if x>mxx then
mxx:=x; { Set point as start or end of horiz line }
end;
if mnx<0 then
mnx:=0;
if mxx>319 then
mxx:=319; { Range checking on horizontal line }
if mnx<=mxx then
hline (mnx,mxx,yc,color,where); { Draw the horizontal line }
end;
end;
{──────────────────────────────────────────────────────────────────────────}
Function rad (theta : real) : real;
{ This calculates the degrees of an angle }
BEGIN
rad := theta * pi / 180
END;
{──────────────────────────────────────────────────────────────────────────}
Procedure Putpixel (X,Y : Integer; Col : Byte; where:word); assembler;
{ This puts a pixel on the screen by writing directly to memory. }
Asm
mov ax,[where]
mov es,ax
mov bx,[X]
mov dx,[Y]
mov di,bx
mov bx, dx {; bx = dx}
shl dx, 8
shl bx, 6
add dx, bx {; dx = dx + bx (ie y*320)}
add di, dx {; finalise location}
mov al, [Col]
stosb
End;
{──────────────────────────────────────────────────────────────────────────}
Function Getpixel (X,Y : Integer; where:word):byte; assembler;
{ This puts a pixel on the screen by writing directly to memory. }
Asm
mov ax,[where]
mov es,ax
mov bx,[X]
mov dx,[Y]
mov di,bx
mov bx, dx {; bx = dx}
shl dx, 8
shl bx, 6
add dx, bx {; dx = dx + bx (ie y*320)}
add di, dx {; finalise location}
lodsb
End;
{──────────────────────────────────────────────────────────────────────────}
Procedure LoadCEL (FileName : string; ScrPtr : pointer);
{ This loads the cel 'filename' into the pointer scrptr }
var
Fil : file;
Buf : array [1..1024] of byte;
BlocksRead, Count : word;
begin
assign (Fil, FileName);
reset (Fil, 1);
BlockRead (Fil, Buf, 800); { Read and ignore the 800 byte header }
Count := 0; BlocksRead := $FFFF;
while (not eof (Fil)) and (BlocksRead <> 0) do begin
BlockRead (Fil, mem [seg (ScrPtr^): ofs (ScrPtr^) + Count], 1024, BlocksRead);
Count := Count + 1024;
end;
close (Fil);
end;
BEGIN
END.